LIQUI MOLY A/C System Cleaner (Spray)A specialized cleaner designed to remove mold, bacteria, and musty odors from air conditioning systems without the need for disassembly. It leaves a pleasant, fresh scent and forms a protective film after cleaning. Suitable for passenger cars, commercial vehicles, buses, and household A/C systems. An expert microbiological report is available to verify its effectiveness.Key Benefits:Destroys mold and bacteriaEliminates unpleasant odorsEnsures clean, fresh airCleans air inlet ductsForms a protective filmApplication Overview:Each pack treats one A/C system (vehicle or home unit).Follow the vehicle or A/C system manufacturer’s instructions if available.If none are provided, follow the LIQUI MOLY recommended procedure.Preparation Before Cleaning:Ensure the windows are open during the cleaning process.Avoid inhaling vapors.Check that condensation drain openings are clear.Dry the evaporator for 10 minutes:Engine runningA/C offAir circulation mode onAirflow set to footwellTemperature and blower at maximumCleaning Instructions:Insert the spray probe toward the evaporator, typically at the vehicle’s center (consult vehicle-specific guidance).Operate the cleaner while slowly moving the probe back and forth to thoroughly flush the evaporator.Allow the cleaner to act for 15 to 20 minutes.Repeat the 10-minute drying cycle using the same settings as before.Replace the dust and pollen cabin filter after cleaning.Important Note: Any spilled cleaner must be wiped up using a damp cloth and water.Safety Reminder: Use biocides safely. Always read the label and product information before use.