If it says T-Cut…it works! T-Cut The Original Restorer has been used for cleaning and restoring the original colour of cars since 1954. The unique formula brings back the original colour and lustre to paintwork, removing oxidation, scratches*, ingrained road grime, tar spots and baked on insects. T-Cut Original does not contain silicone or leave any harmful residues, ideal for use as a scratch remover and paintwork colour restorer for your car. T-Cut Original rejuvenates paintwork and fully prepares surfaces for the next polishing stage, waxing or repainting. T-Cut Original is not just used to remove scratches and restore faded paintwork on cars, it can also be used on painted surfaces found in the home, caravans, bikes, boats, metal polishing, domestic appliances, and in antique restoration. Note: Do not use on matt or special effect paintwork. For Metallic and Pearlescent paint finishes use T-Cut Paint Perfection. Do not use in hot conditions or direct sunlight. Do not apply to unsound or freshly painted surfaces. Do not use on glass, vinyl, unpainted or plastic bumpers and car trims. Test on an inconspicuous area first. Dispose of cloth after use. Directions:  We recommend using 2 quality microfibre cloths, 1 damp cloth to apply and 1 dry cloth to buff. 1) Ensure the surface is clean and dry. 2) Shake the bottle well and pour on to the damp cloth. 3) Working on a small area at a time (approx. 1sq ft) apply the product to the surface working in a circular motion. 4) Buff off any excess product before it dries. 5) Apply T-Cut Ceramic Wax or T-Cut Final Glaze to protect the paint finish and leave a brilliant shine.   * A surface scratch is determined by feeling no obstruction when passing a fingernail over the mark. if an obstruction is noticed, it will be deeper than a surface scratch and this product can only help in improving the appearance of a scratch.