The Trend CraftPro Round Over and Ovolo Router Cutter with a 19mm cutting diameter, 9.5mm cut length, 1/8" radius, and 1/4" shank leaves a precise, fine round-over detail for a contemporary eased edge profile on both straight and curved edges. The imperial 1/8" radius makes it ideal for matched replication of existing profiles. The bearing-guided design requires no side fence, and two bearings are supplied so you can switch between a clean round-over and a quirked ovolo moulding. The two-flute TCT carbide tips ensure clean cutting with fast waste clearance in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up, prolonging cutter life. The 'K' mark 1/4" shank ensures safe working practice and easy control in smaller, hand-held routers. Features and Benefits: • 1/8" imperial radius for precise matched replication of existing profiles • Fine round-over detail for a contemporary eased edge on straight and curved work • Bearing-guided — no side fence required • Two bearings included for round-over or quirked ovolo options • Two-flute TCT carbide tips for clean cuts and efficient waste clearance • PTFE coating reduces heat and resin build-up for longer cutter life • 1/4" shank with 'K' mark for safe use in smaller routers Specifications: Diameter Cut: 19mm Cut Length: 9.5mm Shank Diameter: 1/4" Dia Imperial: 3/4" Cut Length Imperial: 3/8" Overall Length: 61mm Bearing Diameter: 9.5mm (3/8") Radius 1: 3.2mm (1/8")