B&Q - Plastic Weld High Strength Epoxy Plastic Glue Repair All Type Plastics 2X25Ml
Dual Syringe, 2x25 mlA structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.How To UsePROTECT: Work area must be protected from accidental spills.CLEAN: Surfaces must be clean, dry and free of grease and oil.PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess epoxy immediately.CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.CLEAN-UP: Attach nozzle cap and store in molded tray.WARNING: Adhesive will not bond mostpolyethylene or polypropylene plasticsApplicationAutomobileSuggested application.
Price now:
From
£18.49
To
£18.99
B&Q - Plastic Weld High Strength Epoxy Plastic Glue Repair All Type Plastics 2X25Ml
Dual Syringe, 2x25 mlA structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.How To UsePROTECT: Work area must be protected from accidental spills.CLEAN: Surfaces must be clean, dry and free of grease and oil.PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess epoxy immediately.CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.CLEAN-UP: Attach nozzle cap and store in molded tray.WARNING: Adhesive will not bond mostpolyethylene or polypropylene plasticsApplicationAutomobileSuggested application.
Price now:
From
£18.49
To
£18.99
This site contains affiliate links for which we may be compensated.
eBay
New
£18.49
B&Q
11.77% (+ £2.00)
New
£18.99
Currently Unavailable
Product Description
Dual Syringe, 2x25 mlA structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.How To UsePROTECT: Work area must be protected from accidental spills.CLEAN: Surfaces must be clean, dry and free of grease and oil.PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess epoxy immediately.CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.CLEAN-UP: Attach nozzle cap and store in molded tray.WARNING: Adhesive will not bond mostpolyethylene or polypropylene plasticsApplicationAutomobileSuggested application.
Product Specifications
General | |
|---|---|
Brand | Permatex |
Color | cream |
Material | plastic |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.