B&Q - M8 X 35mm Black Hex Socket Countersunk Bolts (Pack Of: 10) Din 7991 Flat Head Allen Screws
Black hex socket countersunk bolts manufactured to DIN 7991, for fixings where the bolt head needs to sit flush with the surface: flat-pack furniture and cabinetry, 3D printer and machine frames, electronics enclosures and general workshop and DIY fixing jobs. This pack contains 10 M8 x 35mm bolts.The 90 degree conical countersunk head seats flush with, or just below, the surrounding material once fully driven home, leaving a smooth, snag-free surface rather than a proud bolt head. The fully recessed internal hexagon socket lets you tighten the bolt with an Allen key, straight down the centre of the fastener, which also suits fixing points too shallow or tight for a spanner or screwdriver.Made from carbon steel to property class 10.9, fully threaded, with a black oxide finish.Specification:Size: M8 x 35mm (thread diameter x total length)Standard: DIN 7991Material: carbon steel, property class 10.9Finish: black oxideHead: 90 degree countersunk, 16mm diameter, 4.4mm highDrive: internal hexagon (Allen key) socket, 5mm keyThread: full length, metric M8Pack size: 10Sizing note: countersunk bolts are measured by their total length, including the head. Measure from the flat top face of the head to the tip of the thread to confirm the correct length.Fitting: drill, punch or machine a countersink taper into the fixing material sized to match the 16mm head, so the bolt seats flush rather than standing proud or sinking below the surface. Drive with a 5mm hex key until the head is fully seated, into a tapped hole, a standard nut or a threaded insert with a matching M8 metric thread.Ten sizes are available: M4 x 8mm, M4 x 12mm, M5 x 10mm, M5 x 20mm, M6 x 16mm, M6 x 30mm, M8 x 20mm, M8 x 25mm, M8 x 30mm and M8 x 35mm, in packs of 2, 10, 50 and 100.
Price now:
From
£8.78
To
£13.18
B&Q - M8 X 35mm Black Hex Socket Countersunk Bolts (Pack Of: 10) Din 7991 Flat Head Allen Screws
Black hex socket countersunk bolts manufactured to DIN 7991, for fixings where the bolt head needs to sit flush with the surface: flat-pack furniture and cabinetry, 3D printer and machine frames, electronics enclosures and general workshop and DIY fixing jobs. This pack contains 10 M8 x 35mm bolts.The 90 degree conical countersunk head seats flush with, or just below, the surrounding material once fully driven home, leaving a smooth, snag-free surface rather than a proud bolt head. The fully recessed internal hexagon socket lets you tighten the bolt with an Allen key, straight down the centre of the fastener, which also suits fixing points too shallow or tight for a spanner or screwdriver.Made from carbon steel to property class 10.9, fully threaded, with a black oxide finish.Specification:Size: M8 x 35mm (thread diameter x total length)Standard: DIN 7991Material: carbon steel, property class 10.9Finish: black oxideHead: 90 degree countersunk, 16mm diameter, 4.4mm highDrive: internal hexagon (Allen key) socket, 5mm keyThread: full length, metric M8Pack size: 10Sizing note: countersunk bolts are measured by their total length, including the head. Measure from the flat top face of the head to the tip of the thread to confirm the correct length.Fitting: drill, punch or machine a countersink taper into the fixing material sized to match the 16mm head, so the bolt seats flush rather than standing proud or sinking below the surface. Drive with a 5mm hex key until the head is fully seated, into a tapped hole, a standard nut or a threaded insert with a matching M8 metric thread.Ten sizes are available: M4 x 8mm, M4 x 12mm, M5 x 10mm, M5 x 20mm, M6 x 16mm, M6 x 30mm, M8 x 20mm, M8 x 25mm, M8 x 30mm and M8 x 35mm, in packs of 2, 10, 50 and 100.
Price now:
From
£8.78
To
£13.18
This site contains affiliate links for which we may be compensated.
OnBuy.com
9.07% (+ £0.73)
New
£8.78
B&Q
20.04% (+ £2.20)
New
£13.18
Product Description
Black hex socket countersunk bolts manufactured to DIN 7991, for fixings where the bolt head needs to sit flush with the surface: flat-pack furniture and cabinetry, 3D printer and machine frames, electronics enclosures and general workshop and DIY fixing jobs. This pack contains 10 M8 x 35mm bolts.The 90 degree conical countersunk head seats flush with, or just below, the surrounding material once fully driven home, leaving a smooth, snag-free surface rather than a proud bolt head. The fully recessed internal hexagon socket lets you tighten the bolt with an Allen key, straight down the centre of the fastener, which also suits fixing points too shallow or tight for a spanner or screwdriver.Made from carbon steel to property class 10.9, fully threaded, with a black oxide finish.Specification:Size: M8 x 35mm (thread diameter x total length)Standard: DIN 7991Material: carbon steel, property class 10.9Finish: black oxideHead: 90 degree countersunk, 16mm diameter, 4.4mm highDrive: internal hexagon (Allen key) socket, 5mm keyThread: full length, metric M8Pack size: 10Sizing note: countersunk bolts are measured by their total length, including the head. Measure from the flat top face of the head to the tip of the thread to confirm the correct length.Fitting: drill, punch or machine a countersink taper into the fixing material sized to match the 16mm head, so the bolt seats flush rather than standing proud or sinking below the surface. Drive with a 5mm hex key until the head is fully seated, into a tapped hole, a standard nut or a threaded insert with a matching M8 metric thread.Ten sizes are available: M4 x 8mm, M4 x 12mm, M5 x 10mm, M5 x 20mm, M6 x 16mm, M6 x 30mm, M8 x 20mm, M8 x 25mm, M8 x 30mm and M8 x 35mm, in packs of 2, 10, 50 and 100.
Product Specifications
General | |
|---|---|
Color | black |
Material | steel |
Brand | DIYUK |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.