The HG Mould Remover Spray quickly and effectively removes mould, mildew and fungus from almost any surface, whilst preventing re-growth. Ideal to use on the silicon seal between the bathtub and wall, on outdoor furniture, around window frames or on plastered walls. This anti mould foam is also suitable for cleaning grout, painted ceilings, swimming pool tiles and seals, as well as mouldy stains in the garage, shed and conservatory. The easy to use spray rapidly removes all brown and black marks caused by mould, fungus and algae - both indoors or outdoors. We also have a foam spray version of the mould and mildew cleaner: HG mould remover foam spray Includes: 1 x HG Mould Spray (500ml spray bottle, 186050106) How to use HG Mould Spray: The mould cleaner has a bleaching effect. If in doubt, test first in an inconspicuous place. 1. Spray the surface from a distance of 3 to 5 cm with HG mould spray. 2. Leave to work for 30 minutes and then clean with water and a sponge. Contains chlorine based bleaching agents. We recommend using gloves and ventilating well during use. Use biocides safely. Always read the label and product information before use.Test before use, spray from 3-5cm and leave it for 30 minutes. Repeat if necessary and turn the nozzle a quarter backwards to block it. Remember to rinse the nozzle with hot water before reusing. For large surfaces with green deposits we recommend HG algae and mould remover Safety Warning Attention: we recommend you to ventilate well during use and to wear rubber/plastics gloves. Prevent splashing on clothing, (high) gloss paint and laminated blinds. Rinse with water immediately in case of contact with skin, clothing and sensitive surfaces. Avoid contact with metals such as prints on ornamental strips, aluminium and stainless steel. Do no treat coloured surfaces. We do not recommend using this product on artexed ceilings. In elastic grouting (for instance silicone paste) sometimes some permanent brown discolouration may occur after use. In badly glazed tiles and old tiles with hairline cracks brown discolouration may occur. This brown colour can possibly be removed with hypo (sodium thiosulfate), which can be obtained from your customer service department. Do not reuse the bottle. Medical personnel can request the data sheet via +31 (0)36 54 94 777 the consumer's information sheet can be obtained via www.HG.eu warning h315- causes skin irritation. H319- causes serious eye irritation. H400- very toxic to aquatic life. Euh206- warning! Do not use together with other products. May release dangerous gases (chlorine). P101- if medical advice is needed, have product container or label at hand. P102- keep out of reach of children. P264- wash hands thoroughly after handling. P273- avoid release to the area. P305+p351+p338- if in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+p313- if eye irritation persists: get medical advice/attention.Ingredients: Mould remover Directions Remove the locking clip, press the nozzle on the front and turn a quarterBox Contains: 1 x bottle of HG Mould Spray 0.5LManufacturer Contact Information Unit 2 Lanswood Park Colchester Co7 7Fd | HG Mould Remover Spray Kills Black Mold & Mildew on Walls & Tiles 500ml